Family run in Pleasant Hill, Oregon since 1976

Monday to Friday, 8am to 4pm rainbowpump@yahoo.com (541) 726-1394
Excavated pit black well seal blue pipe pitless adapter lane county

Below-Ground Well Connections

Pitless Adapter Installation in Eugene, OR, and Lane County

Rainbow Pump Co Inc handles pitless adapter installation in Eugene, OR, and nearby towns, giving private wells a sealed connection below the frost line. Call (541) 726-1394, Monday to Friday, 8am to 4pm.

What a Pitless Adapter Does for a Private Well

The adapter is the fitting that lets water leave the well casing underground, below the depth where the soil freezes. The drop pipe from a submersible pump connects to it inside the casing, and the water line to the house leaves through the casing wall and runs buried to the home. The top of the casing stays above ground, capped and sealed.

That arrangement gives you a frost free well connection without a well pit or a heated pump house over the wellhead. It also keeps the opening in the casing sealed against surface water, which matters for the safety of the water you drink.

Most wells with a submersible pump rely on one. When it is sized and set correctly, the adapter also makes later pump service easier, because the pump can be lifted out through the top of the casing without digging up the water line.

Threaded metal pipe end water stream close up pleasant hill well pump

Signs You Need a Pitless Adapter Replacement

A worn or damaged adapter tends to show up as a pressure problem that has nothing to do with the pump. The adapter seals with an O-ring, and when that seal fails, water from the pressure side can leak back into the well instead of reaching the house.

  • The pump runs longer than it used to for the same water use
  • Pressure drops slowly when no fixture is open
  • Water that turns cloudy or muddy after heavy rain
  • Visible corrosion on the adapter body when the well cap is removed
  • A casing that was damaged by a vehicle, a mower or ground movement

These symptoms overlap with a failing check valve or a leak in the line, so we test before we dig or pull anything. A pitless adapter replacement is usually done while the pump is lifted, which is a good time to look over a submersible well pump for wear.

Submersible pump test water splash red rope hose clamps pleasant hill

Oregon Wellhead Rules That Shape the Work

Oregon sets clear standards for the top of a well. Under the Oregon Water Resources Department's well construction rules, the casing head or pitless unit must extend at least 12 inches above the finished ground surface and above the local surface runoff level. The same rules require the adapter or unit to be watertight against contaminants and vented to the atmosphere.

Those requirements exist to keep surface water, insects and debris out of the well. An adapter that is cracked, poorly sealed or sitting in a low spot where runoff collects works against them.

We install every adapter with those standards in mind and check that the well cap is sound and vented. If anything at the wellhead deserves attention, we point it out and explain why it matters.

Water arcing from galvanized elbow white pvc well casing dry grass lowell oregon

Pitless Adapter and Pitless Unit: Choosing the Right Fit

The terms are close, though the parts differ. An adapter is a two-piece fitting: one half mounts through a hole in the casing wall, and the other half slides down inside the casing on the drop pipe and locks into it with a sealed joint.

A pitless unit is a factory-built section of casing with the discharge connection already made, installed in place of the top portion of the casing. It is a heavier-duty option that suits some larger wells and commercial or agricultural systems.

For pitless adapter installation in Eugene, OR, the right choice depends on the casing diameter and material, the pump's size and weight, and the flow the system needs to carry. We match the part to the well rather than to what happens to be on the truck, and we explain the reasoning before we start.

Ice coated gray pipe valves icicles brick wall frozen pump system lane county

How We Work

Our Pitless Adapter Installation Process

Every pitless job follows the same steps, whether it is a new connection or a replacement for a leaking one. The goal is a tight seal, a correctly supported pump and a water line that stays below frost.

  • 1

    Locate and Expose

    We locate the water line where it leaves the casing, excavate to the adapter depth and protect the open well from dirt and debris while we work.

  • 2

    Lift the Pump Assembly

    We disconnect power, attach a lifting pipe to the adapter's inside half and raise the drop pipe, wiring and pump far enough to work on the connection.

  • 3

    Fit and Seal the Adapter

    We mount the new adapter on the casing, replace the O-ring seal, connect the buried water line and lower the pump assembly back into place.

  • 4

    Restore and Test

    We backfill around the casing so the surface drains away, restore power, run the pump and check for leaks and steady pressure at the house.

What Affects the Cost of Pitless Adapter Work

We price pitless work after we have seen the well, because the job varies a great deal from one property to the next. An adapter on a shallow line near the house is a different job from one on a deep line far out in a field. The depth of the water line, the casing size and material, and how deep the pump hangs all affect the time it takes.

Site conditions matter too. A wellhead in open ground is simpler to dig around than one beside a driveway, a deck or tree roots. When the pump comes up, we may find a worn wire splice, a corroded drop pipe or a pump near the end of its life, and we will explain those findings and their options before any added work.

Yellow submersible pump beside open green well cover lane county oregon

Why Rainbow Pump

Why Choose Rainbow Pump for Pitless Adapter Installation in Eugene, OR

Rainbow Pump Co Inc has worked on private wells since 1976, and the Jones family carries on its tradition of hands-on management. Our technicians bring decades of experience and factory training from top pump manufacturers to every pitless adapter installation in Eugene, OR, and the surrounding area.

  • Founded in 1976 and based in Pleasant Hill
  • Licensed with the Oregon Construction Contractors Board, CCB #38493
  • Residential, commercial and agricultural wells
  • Pump, adapter and wellhead checked on one visit

Because we install and service pumps every day, lifting a pump to reach the adapter is routine work for us. We look after the whole assembly while it is out of the well.

Rusty sump pit black submersible pump tape measure pleasant hill oregon

Pitless Work on Wells Near Pleasant Hill, Eugene and Springfield

Our shop is in Pleasant Hill, and we handle pitless work for wells within about 50 miles, including well pump service in Eugene, well pump service in Springfield and well pump service in Pleasant Hill. Rural properties across our Lane County service areas rely on that buried connection every day.

Eugene averages 52 nights a year at or below freezing, so keeping the water line below frost is practical protection here. When a line has already frozen, our frozen well pump repairs get water moving again. Pitless work is one part of the water well pump services we provide. From small homesteads to working farms, owners call us for pitless adapter installation in Eugene, OR, and the communities around it.

Pitless Adapter Questions

How deep is the adapter installed on a well?

The adapter sits below the depth where the ground freezes, at the same depth as the buried water line that runs to the house. The exact depth varies with the property, the soil and how the original line was laid. When we install or replace one, we keep the connection low enough to protect it through a hard freeze while keeping the casing top above grade.

Can an old well pit be converted to a pitless adapter?

Many older wells ended in a pit below ground, where surface water and animals can reach the wellhead. Converting one usually means bringing the wellhead above grade to meet Oregon's construction standards and fitting a sealed connection below frost. We look at the well, explain what the conversion involves and tell you plainly if the work calls for a licensed well constructor.

Does the pump have to come out to replace the adapter?

The pump assembly has to be lifted, though not always removed from the well. The inside half of the adapter carries the weight of the drop pipe and pump, so we raise that assembly with a lifting pipe to free the connection. While it is up, we inspect the wiring, the drop pipe and the pump so any wear is found at the same time.

Will a leaking adapter affect my water quality?

It can. A failed seal on the outside of the casing may let shallow groundwater or surface runoff into the well, which is why cloudy water after rain is a warning sign. A leak on the inside seal mostly wastes pump run time. If we find a breach that could have let contaminants in, we recommend testing the water after the repair.

Do you install pitless units for larger wells?

Yes. We work on residential, commercial and agricultural wells, and some larger systems are better served by a pitless unit than an adapter. The choice depends on the casing size, the weight of the pump and pipe and the flow the system must carry. We recommend the option that suits your well and explain why before we order parts.

Hands holding brass pitless adapter galvanized pipe excavated trench lane county
Bronze pitless adapter gasket nut on rock pleasant hill or

Protect Your Well

Set Up Your Pitless Adapter Visit

A sound pitless connection keeps your water line safe from frost and your well sealed from what runs across the ground. Call (541) 726-1394, Monday to Friday, 8am to 4pm, or send us a message and we will arrange a time to look at your wellhead.