Family run in Pleasant Hill, Oregon since 1976

Monday to Friday, 8am to 4pm rainbowpump@yahoo.com (541) 726-1394
Yellow submersible pump beside open green well cover lane county oregon

Submersible Pump Services

Repair and Replacement for the Submersible Well Pump in Eugene, OR

Rainbow Pump Co Inc repairs, replaces and installs the submersible well pump in Eugene, OR, homes and rural properties. Call (541) 726-1394 to talk with a pump technician.

Signs Your Submersible Well Pump Needs Attention

A submersible pump works out of sight, deep in the well, so the first clues show up at the faucet or the pressure tank. Small changes in how the water behaves are worth a call, because a pump that struggles for months often fails at the worst possible time.

A short list of symptoms covers most early problems. Watch for these signs of a pump that needs attention:

  • Pressure that fades during showers or while watering the garden
  • A pump that runs longer than it used to before shutting off
  • Air, sand or silt coming through the faucets
  • Higher electric bills with no other change in water use
  • A breaker that trips when the pump starts
  • No water at all, even though the breaker is on
Water holding tank pressure tank pump system pleasant hill

How a Submersible Well Pump Works

A submersible well pump sits down inside the well casing, below the water. Its motor pushes water up a drop pipe, out through a pitless adapter below the frost line, and into the pressure tank in the house or well house.

A pressure switch tells the pump when to run. When household use lowers the pressure in the tank, the switch starts the pump, and when the tank refills to its set pressure, the switch shuts it off. Some pumps also rely on a control box on the wall, which holds the starting components for the motor.

Because each part depends on the others, a problem that looks like a bad pump can start in the switch, the control box, the wiring or the tank. Testing the whole system first keeps you from paying for a pump that did not need replacing. Every submersible well pump in Eugene, OR, that we service gets that whole-system test first.

Blue jet pump motor mounted on tank gauge pressure switch cottage grove or

Submersible Pump Repair

Submersible pump repair starts with testing from the surface. Our technicians measure voltage and amperage at the controls, check the wiring down the well, and look at how the pressure switch and pressure tank are behaving. Many problems, such as a failed capacitor, a burned switch or a loose connection, can be fixed without pulling the pump at all.

When the trouble is down the well, we pull the pump, the drop pipe and the wire to inspect them. A split pipe, a damaged splice or a worn check valve can be replaced, and the pump goes back into service. We also check the wire splice at the motor, since a failed splice can look exactly like a dead pump from the surface.

A pump that keeps starting and stopping is often the victim of a waterlogged tank rather than the cause. If your tank has lost its air charge, our pressure tank repair service fixes the problem that is wearing the pump out.

Looking down stone lined dug well shaft submersible pump lane county or

Submersible Well Pump Replacement

Submersible well pump replacement makes sense when the motor has failed, the pump has worn past the point of repair, or repeated breakdowns cost more than a new pump would. Our technicians explain what they found and why replacement is the better value before any new pump goes in.

A replacement is also a chance to fix whatever shortened the old pump's life. That might mean a new pressure switch, a properly charged pressure tank, new wire or new drop pipe. Sizing the new pump to the well and to your household's water use matters just as much as the brand.

When the pitless adapter that connects the drop pipe to your water line is worn or leaking, we replace it in the same visit through our pitless adapter installation service. Doing both at once saves a second trip and a second time pulling pipe.

Sunlit pressure switch gauge brass tee fittings blue tank pitless lane county

What to Expect From a Submersible Pump Installation

A submersible pump installation is planned around measurements of your well, not guesses. Our technicians gather the facts first, so the pump, pipe and wiring all match the job they have to do.

  • 1

    Measure the Well

    We record the well depth and the water level so the pump is set at the right height and stays under water.

  • 2

    Size the Pump

    We match pump capacity and pressure to the well depth, your household's water use and the distance to the tank.

  • 3

    Set the Pump and Pipe

    We lower the pump on new drop pipe and wire, seat it in the pitless adapter, and connect it to the controls.

  • 4

    Test Under Real Use

    We run the system, watch the pressure switch cycle and check the tank charge before we leave.

Deep Well Submersible Pump Considerations

A deep well submersible pump has more work to do than a pump set in a shallow well. Every extra foot of lift adds to the load on the motor, so the pump has to be sized for the full distance from the water level to the pressure tank.

Depth also changes the wiring. Longer wire runs need the right wire size to deliver full voltage to the motor, and an undersized wire can shorten a pump's life without any obvious warning signs. The weight of the pump, pipe and wire grows with depth too, which makes careful handling important when a pump is pulled or set.

Our technicians take a well depth measurement before recommending a deep well pump. That number, along with the water level, guides every other choice in the system. When an older deep well pump is replaced, we also check whether the existing wire and pipe can safely stay in service.

Threaded metal pipe end water stream close up pleasant hill well pump

What Affects Submersible Well Pump Costs

The biggest factor is whether the job is a repair at the surface, a repair down the well or a full replacement. A switch or control box repair costs far less than pulling the pump, pipe and wire out of the well.

Well depth affects both the pump and the labor. Deeper wells need more pipe, longer wire and sometimes a larger pump, and pulling or setting them takes longer. The condition of the existing pipe, wire and pitless adapter, and whether the pressure tank needs work at the same time, also shape the final price.

Our technicians walk you through what they found and what each option involves. You can weigh a repair against a replacement for your submersible well pump in Eugene, OR, with the facts in hand.

Manual hand pump well casing electrical box ferns pleasant hill lane county

Why Rainbow Pump

Why Choose Rainbow Pump for Your Submersible Well Pump in Eugene, OR

Rainbow Pump Co Inc has installed and repaired well pumps since 1976. The Jones family acquired the company and carries on a family tradition of hands-on management, and installation and repair are still the core of the work.

Our technicians have decades of experience and factory training from top pump manufacturers, so they understand how the motors, controls and drop pipe in a submersible system work together. That knowledge helps your system work efficiently and last longer.

We work on residential, commercial and agricultural pumps, and we are licensed with the Oregon Construction Contractors Board, CCB #38493. Every submersible job is part of our wider water well pump services across Lane County.

Ice coated gray pipe valves icicles brick wall frozen pump system lane county

Submersible Pump Service Across the Southern Willamette Valley

We are based in Pleasant Hill and serve homes and properties within about 50 miles. Many of the wells we work on serve rural homes beyond city water service, where the submersible pump is the household's only source of water. Keeping a submersible well pump in Eugene, OR, or in the hills outside town running well means fewer surprises when the weather turns.

Our technicians regularly handle well pump service in Eugene, in the rural areas around Springfield and at home in Pleasant Hill. We also reach the smaller communities across our Lane County service areas.

Wherever your well is, the same careful approach applies. We measure the well, test the whole system, and fix the real cause.

Submersible Well Pump Questions

How long does a submersible well pump last?

Pump life depends on water quality, how often the pump cycles, and whether it was sized and installed correctly. Sand in the water and a waterlogged pressure tank both shorten it. Regular checks of the pressure switch and tank charge help a submersible pump reach a long service life, and our technicians can tell you how your system is holding up.

Does a submersible pump have to come out of the well to be repaired?

Not always. Many problems sit at the surface, in the pressure switch, control box or wiring, and our technicians test those first. The pump comes out only when testing points to the pump, the drop pipe, the check valve or the wire down the well. Testing first avoids pulling a pump that is working properly.

Should I repair or replace an old submersible pump?

It depends on what failed and how much life the rest of the system has left. A failed switch or capacitor is worth repairing. A worn motor in an older pump, or a pump with repeated breakdowns, is usually better replaced. Our technicians explain both options and the reasons behind their recommendation before you decide.

Why does my submersible pump run but deliver little water?

A pump that runs with weak output may have a worn impeller, a clogged intake screen, a leak in the drop pipe, or a water level that has dropped close to the pump. Each cause has a different fix. A technician can measure the water level and test the system to find which one is limiting your flow.

Sump pit submersible pump pvc piping pleasant hill
Crawl space sump basin submersible pump white vapor barrier work light oregon

Talk With a Pump Technician

Keep Your Submersible Pump Working for Years

A submersible pump does its job out of sight until the day it stops. Call Rainbow Pump Co Inc with what you are noticing, and our factory-trained technicians will test the whole system and recommend the repair or replacement that fits your well.