Family run in Pleasant Hill, Oregon since 1976

Monday to Friday, 8am to 4pm rainbowpump@yahoo.com (541) 726-1394
Manual hand pump well casing electrical box ferns pleasant hill lane county

New Well Systems

Well Pump Installation in Eugene, OR for New Wells and New Homes

Rainbow Pump Co Inc handles well pump installation in Eugene, OR and across Lane County, setting the pump, wiring and pressure tank for a new well. Call (541) 726-1394, Monday to Friday, 8am to 4pm.

Starting Fresh

When a New Well Pump Installation Makes Sense

A new installation is for a well that has never had a working pump system, or for a property that is getting its own supply for the first time. Rural land outside city water service is common across the southern Willamette Valley, and every home built there needs a pump matched to its well. Well pump installation in Eugene, OR serves new homes, new wells and properties changing their water source.

  • A newly constructed well that needs its first pump and controls
  • A new home or cabin on rural land with no city water connection
  • A shop, barn or second dwelling being added to the water supply
  • A property moving from a spring, cistern or hauled water to a well
  • An older, unused well being brought back into service

Oregon requires a water well report for every water supply well that is constructed, filed with the Oregon Water Resources Department. That report records details such as the depth and construction of the well, and it gives us a head start on choosing the right pump.

Water holding tank pressure tank pump system pleasant hill

The Installation Process From Well Report to Running Water

A sound installation starts with the well and the household, not with a pump pulled off a shelf. Each step builds on the one before it, so the finished system fits the water the well can actually give.

  • 1

    Review the Well and Site

    We read the well report, look at the wellhead and plan the route for the water line and the power to the pump.

  • 2

    Size the Pump and Tank

    We match the pump to the well depth, the water level and your expected demand, then pick a pressure tank sized to protect it.

  • 3

    Set the Pump and Wiring

    We lower the pump on its drop pipe and wire, make the connections at the wellhead and install the controls and pressure switch.

  • 4

    Start Up and Walk Through

    We bring the system up to pressure, check the cycling and show you where the controls, the tank and the shutoffs are.

Sizing a New Water Well Pump System

A new water well pump system has to balance two things: what the well can supply and what the property will use. A pump that is too large can draw the well down faster than it recovers, while a pump that is too small leaves the house with weak pressure whenever two taps run at once.

The well depth, the standing water level and the yield all shape the choice. Demand beyond the house matters as well, such as a garden, livestock watering or a shop. Most deep wells use a submersible pump, which sits down in the casing below the water line and pushes water up rather than pulling it.

The pressure tank is part of the same decision. A properly sized tank stores water between cycles so the pump starts less often and lasts longer. Our pressure tank installation work is usually done alongside the pump on a new system.

Black holding tank cream pressure tank green pump new home construction springfi

Well Pump Wiring, Controls and Wellhead Connections

Well pump wiring carries power from the panel, through the controls and down the well to a motor that may sit hundreds of feet below the surface. The wire has to be sized for the depth and the motor, and every splice below ground has to stay watertight for years.

Depending on the pump, the controls include a pressure switch, a control box and a dedicated breaker. Each part is set up so the pump starts and stops at the right pressures and shuts down safely when something goes wrong.

At the top of the well, the water line usually leaves the casing below ground through a pitless adapter, which keeps the line out of the frost and the wellhead sealed. We handle pitless adapter installation as part of many new systems.

Blue jet pump motor mounted on tank gauge pressure switch cottage grove or

What Shapes Well Pump Installation Cost

Well pump installation cost depends on the well and the property more than on the pump alone. Two new wells on the same road can need very different systems.

  • The depth of the well and how deep the pump is set
  • The pump size and type needed for your demand
  • The length of wire, drop pipe and buried water line
  • The pressure tank and controls the system calls for
  • Whether a pitless adapter or well house work is needed

We go over each of these with you before work starts, so the plan and the cost are clear and nothing about the system is a surprise later. Every well pump installation in Eugene, OR and the surrounding area starts from that shared plan.

Excavated pit black well seal blue pipe pitless adapter lane county

Why Rainbow Pump

Why Property Owners Choose Rainbow Pump Co Inc for New Systems

Rainbow Pump Co Inc has been installing and servicing water well pumps since 1976. Today the Jones family carries on a family tradition of hands-on management, and that care shows in how each new system is planned.

Our technicians have decades of experience and factory training from top pump manufacturers. We are licensed with the Oregon Construction Contractors Board, CCB #38493, and we install residential, commercial and agricultural pump systems.

A new installation is also the start of a long relationship with your well. The same team that sets your pump can maintain it, test it and repair it for years to come, through our full range of water well pump services.

Lab technician hairnet mask microscopes test tubes water sample oregon

Well Pump Installation in Eugene, OR and Nearby Towns

From our shop in Pleasant Hill, we install pump systems within about 50 miles, including new homes on acreage outside Eugene and Springfield. About 20,000 rural households in Lane County rely on their own wells, and new homes keep adding to that number.

Our installations reach rural properties around Eugene well pump service customers, new builds near Springfield well pump service customers, and homes close to our shop through Pleasant Hill well pump service. We also travel to Middle Fork communities such as Lowell, Dexter and Jasper.

Each area has its own mix of well depths and terrain, from valley floor parcels to hillside lots, and well pump installation in Eugene, OR looks different on each. Check our service areas to confirm we reach your property.

New Well Pump Installation Questions

What size pump does a new well need?

The right size depends on the well depth, the standing water level, the yield of the well and how much water the property will use at once. The well report filed for your well gives much of that information. We use it, along with your plans for the home, garden and any livestock, to choose a pump that the well can support.

Do I need a pressure tank with a new well pump?

Yes, most systems need one. The pressure tank stores a supply of water under pressure, so the pump does not start every time a tap opens. That protects the motor from constant starts and keeps pressure steadier in the house. The tank is sized to the pump and to the household, so both are chosen together.

Should a new well use a submersible pump or a jet pump?

Most deeper wells use a submersible pump, which sits below the water level and handles deeper wells well. A jet pump sits above ground and suits shallow wells with a high water level. The well report and the water level tell us which type fits your well before anything is ordered.

What should I have ready before calling about a new installation?

Have the well report if you have it, along with the address of the well and the planned use of the water. Note whether the home is finished or still being built, and where the house sits relative to the wellhead. That information helps us plan the wiring, water line and pump size on the first conversation.

Can one new system supply a home and irrigation together?

It can, when the well produces enough water to support both. Irrigation adds a large, steady demand on top of household use, so the pump, tank and controls have to be planned for the combined load. If the well yield is limited, we talk through options such as watering schedules or storage before the system is built.

Yellow submersible pump beside open green well cover lane county oregon
Ice coated gray pipe valves icicles brick wall frozen pump system lane county

Start Your System

Plan Your New Water System With Our Installers

A new well deserves a pump system planned around its depth, its yield and the way you will live on the property. Call Rainbow Pump Co Inc at (541) 726-1394, Monday to Friday, 8am to 4pm, and we will start with your well report.