
New and Replacement Tanks
Pressure Tank Installation in Eugene, OR, for Private Wells
Rainbow Pump Co Inc handles pressure tank installation in Eugene, OR, and across Lane County, fitting new and replacement tanks to private well systems. Call (541) 726-1394, Monday to Friday, 8am to 4pm.
Signs Your Well Pressure Tank Is Ready for Replacement
A pressure tank on a private well stores water under pressure, so the pump does not start every time a faucet opens. When the tank wears out, the pump starts and stops far more often, and that extra cycling shortens the life of the motor and the pressure switch. Most homeowners notice the symptoms long before they think about the tank.
- Rust, sweating or a wet floor around the base of the tank
- The pump clicking on and off rapidly while water runs
- Pressure that surges and drops in the shower
- Water spitting from the air valve on top of the tank
- A tank that sounds solid with water when you knock near the top
Some of these problems can be fixed with a recharge or a new switch, which our pressure tank repair work covers. When the shell is rusted through or the bladder has failed, a pressure tank replacement is the better choice.

Well Pressure Tank Sizing for Your Home and Pump
Sizing is the decision that matters most. A tank that is too small lets the pump run in short bursts, while the right size gives it a longer, steadier run each time it starts. We look at the pump's output in gallons per minute, the pressure switch settings and how the household uses water before we recommend a tank.
Drawdown, the amount of water a tank delivers between pump starts, ties these numbers together. A large family, a home with garden irrigation or a shop with a wash station needs more drawdown than a small cabin. Well pressure tank sizing also accounts for where the tank sits, since a crawl space, a garage or a well house each limits the size and shape that fits.
A pump that has been replaced or upgraded may no longer match the old tank. We check that pairing on every well pump replacement, so the new pump and the tank work as one system.

Bladder Pressure Tank Options and Older Steel Tanks
Most homes we work on today use a bladder pressure tank or a diaphragm tank, where a sealed membrane keeps the air charge apart from the water. The membrane stops the water from absorbing the air, so the tank holds its charge far longer than a plain steel tank. These tanks come in vertical, horizontal and in-line styles, which gives us options in tight spaces.
Older galvanized tanks without a bladder rely on an air volume control or periodic draining to keep their air cushion. Many rural homes around Lane County still have one. Replacing it with a modern bladder tank usually ends the waterlogging these tanks are known for, and our technicians handle the swap, the fittings and the new pressure settings together.

Step by Step
How Our Tank Installation Process Works
Every installation follows the same steps, whether the tank is going into a new system or replacing one that failed. The work centers on getting the pressure settings right, because a well-matched tank and switch protect the pump.
-
1
Assess the System
We check the pump, the pressure switch, the existing tank and the plumbing around it, and we ask how much water the household uses on a busy day.
-
2
Size and Select the Tank
We match the tank's drawdown to the pump's output and recommend a model that fits the space where it will live, with room left for service.
-
3
Install and Connect
We shut down and drain the system, set the new tank, and replace worn fittings, the tank tee, the gauge and the valves where they need it.
-
4
Set and Test Pressure
We set the air precharge a few psi below the switch's cut-in pressure, restart the pump and watch it run through full cycles before we leave.
What Affects the Cost of a Pressure Tank Replacement
Every pressure tank installation in Eugene, OR, starts with a look at the system, and we do not quote a price before that visit because every well setup is different. The main factors are the size and type of tank, the condition of the fittings and switch around it, and how easy it is to reach the space where the tank sits.
A tank in an open garage is a simpler job than one in a tight crawl space or a small well house with a narrow door. Replacing a corroded tank tee, a failing gauge or a worn switch at the same time adds parts, though it can save a second visit later.
When we visit, we explain each option and what it does before any work begins. If the pump itself is near the end of its life, we tell you, and you decide whether to handle both at once.

Why Rainbow Pump
Why Choose Rainbow Pump for Pressure Tank Installation in Eugene, OR
Rainbow Pump Co Inc has worked on water well systems since 1976, and the Jones family carries on its tradition of hands-on management. Our technicians bring decades of experience and factory training from top pump manufacturers to every pressure tank installation in Eugene, OR, and the towns around it.
- Founded in 1976 and based in Pleasant Hill
- Licensed with the Oregon Construction Contractors Board, CCB #38493
- Residential, commercial and agricultural water systems
- Tank, pump and pressure switch treated as one system
We install and repair pumps as well as tanks, so we can tell whether a pressure problem starts in the tank or somewhere else in the well system. That saves you from replacing parts that were never the cause.

Tank Installs From Pleasant Hill to Springfield and Eugene
Our shop is in Pleasant Hill, and we install tanks for homes and properties within about 50 miles. That includes well pump service in Eugene, well pump service in Springfield and well pump service in Pleasant Hill, along with the rural roads between them across our Lane County service areas.
Winter placement matters here. Eugene averages 52 nights a year at or below freezing, so a tank in an unheated well house or garage needs protection, and we talk through placement before we install. A new tank is one part of the water well pump services we provide for private wells in the southern Willamette Valley. Whether the home sits on the edge of town or miles up a gravel road, pressure tank installation in Eugene, OR, and the surrounding area follows the same careful sizing.
Pressure Tank Installation Questions
How long does a pressure tank on a well usually last?
Tank life depends on the water, the tank type and how hard the pump cycles. A bladder tank paired with the right pump and set to the right precharge tends to outlast one that is undersized or waterlogged. Corrosion on the shell, a failed bladder or a pump that cycles constantly are the usual signs that a tank has reached the end of its service life.
How do you choose the right tank for my pump?
We start with the pump's flow in gallons per minute and the cut-in and cut-out settings on the pressure switch. From there we pick a tank with enough drawdown to give the pump a healthy run time on each start. We also consider household size, outdoor watering and the space available, then recommend a specific model and explain why it fits.
Should the pressure switch be replaced along with the tank?
Often it makes sense. A tank that failed slowly usually put the switch through thousands of extra cycles, which pits the contacts and wears the diaphragm. When we install a new tank, we inspect the switch, the gauge and the tank tee. If any of them is worn, we recommend replacing it at the same time so the new tank starts on a sound system.
Where should a new pressure tank be installed?
A tank belongs in a dry, accessible spot that stays above freezing, close enough to the pressure switch for accurate readings. Garages, basements, utility rooms and insulated well houses all work. We avoid locations where a leak would damage finished floors, and we leave enough clearance to service the tank, the gauge and the valves later without removing anything else.
Can an old galvanized tank be swapped for a bladder tank?
Yes. Replacing a galvanized tank with a bladder tank is one of the most common jobs we do. We remove the old tank and its air volume control, fit a correctly sized bladder tank, set the precharge and adjust the switch. Most homeowners notice steadier pressure right away, and the constant draining and recharging an old steel tank needed comes to an end.


Schedule a Visit
Book Your New Tank With Rainbow Pump
A tank sized to your pump steadies your water pressure, protects the motor and keeps the house supplied between pump starts. Call (541) 726-1394, Monday to Friday, 8am to 4pm, or send us a message and we will set up a time to look at your system.